Uncategorized

How to Reset Samsung Dryer – Comprehensive Manual

Do you have a Samsung dryer, but something went wrong with it and you want to reset it? We’ll tell you how to reset Samsung dryer. This will help you fix problems like the error codes on display, or if your dryer won’t spin, heat up, had a broken dryer belt, won’t start, or turn on.

driyer1

Resetting your Samsung dryer control board isn’t complicated or time-consuming. But you need to know how to do it correctly and not break it because many nuances depending on the model of the dryer. We’ll tell you how to reset your Samsung dryer to make it work and help it reset.

What Problems Can be Fixed by Rebooting Samsung Dryers

We will provide you with several effective ways: how to reset Samsung dryer in order to fix this or that problem. We guarantee that our methods will definitely help you reboot your dryer and it will work as before if that’s the only problem of course.

driyer2

If the problem is breakage or something got inside the electric dryer, and it does not start, then we advise you to contact the service center Samsung or consult a specialist.

To find out how to reset Samsung dryer if you need to, and what to do if resetting doesn’t work, keep reading and you’ll find out.

So, How to Reset Samsung Dryer

Resetting your Samsung dryer can help fix problems like error codes, but unfortunately, it won’t fix any technical issues or major problems like a clogged vent or a worn drive belt that’s gone bad.

driyer3

In order to reset your Samsung dryer, press and hold the button on the control panel until the corresponding inscription appears on the screen.

After that, you must press and hold the temperature button until “ok” appears on the panel. After these manipulations, the resetting of your Samsung dryer will be done.

This method involves resetting your Samsung dryers if you have any problems with the network. If you have problems with the codes, that is, the panel displays Samsung dryer error codes, then you can try to perform a reset.

Tip: Read on if you want to know all the ways to reset your Samsung dryer.

Table of Contents with Troubleshooting tips

In this article you will be able to read similar information:

  • How to reset Samsung dryer settings
  • How to run a vent blockage test
  • Samsung dryer error codes
  • Other helpful hints

How to Run a Vent Blockage Test

In order to determine the cause of the problem, you can try a test to see if the vents are clogged. Caution: Make sure the dryer has completely cooled down before beginning the test.

driyer5

To keep your Samsung dryer in working order, you should at least once, or better yet, twice a year. This process will not only help you learn about clogged vents, but will also extend the serviceability of your Samsung dryer.

And so, How to Run the Vent Blockage Test

First, you need to make sure you haven’t left any of your items inside the drum, and then close the door.

Next, you need to press the time adjustment button for time and high. After holding it down, the icons should pop up on the display.

If these combinations do not work and nothing appears on the control panel, try pressing Wrinkle Prevent & Air Fluff.

Then press and hold the reset button on your Samsung dryer for 1-2 minutes to begin the vent clogging test.

Once the test starts, you can’t open the door of the Samsung dryer and at the end, the results will already be shown below.

Results of the Vent Blockage Test

First- if your dryer passed the test and the vents are not clogged, the display will show the number 0 or the word end, as well as the completion will be accompanied by a sound signal.

Second, if your Samsung dryer fails the test for clogged vents and the clothes dryer vent system cannot provide efficient extraction, the control panel will show the letters CLg or Cg, or CL9 or C9. In this case, the completion of the test will be accompanied by an alarm.

The results of the test will be displayed on the control panel after about 3 to 5 minutes, not immediately after the start of the test.

If your Samsung dryer fails the test, you will need to clean the air vents.

How to Completely Reset the Samsung Dryer Exhaust Vent Sensor

In order to reset the blocked vent sensor of your Samsung dryer, you need to perform a reset.

driyer6

The most straightforward way to reset the Samsung dryer is to unplug your Samsung electric dryer and wait 10-15 minutes. Then plug in the dryer and make sure everything works.

An important nuance is that if after repeatedly resetting the settings all the same display gives out errors, it already means that it is necessary to contact a specialist or a service center.

Since the dryer vent sensor can detect blockages in the vent, it can report these problems with signals- error codes on the control board.

This ensures that the owner of the Samsung dryer can find out and troubleshoot the problem as soon as it occurs, without making it worse.

Samsung Dryer Various Error Codes

Sometimes on the display of your Samsung dryer may appear some icons in the form of letters and numbers – an error code.

driyer7

What does this or that error code mean? How to eliminate and correct error codes? This and much more you can find out by continuing to read our article.

In order to find out the meaning of this or that erroneous code, you can also look in the user manual.

Voltage-Related Samsung Dryer Error Codes

If your Samsung dryer is displaying error codes such as 9C1, 9E, 2E, 9E1 on the control board, it means that the error code is voltage related.

The reason for this error code may be the connection of the dryer’s power supply to an extension cord rather than a separate source.

Or you may have a problem with the voltage, it may be too low or too high.

Error Code of Jamming

If the Samsung dryer display shows error codes such as bE, bE2, bC2, or 6E, 6E2, and 6C2, it could mean that the problem is due to jamming.

In that case, you should check to see if the button on the control board is jammed because that’s what can cause an erroneous code to appear.

Therefore, you should always press the buttons as carefully as possible and make sure that they do not jam.

How to Fix the Problem of a Jammed Button

In order to fix this problem, you need to turn off the dryer, for starters, and press and release each button in turn.

It is important to press and release each button and after you have pressed each button, the problem should go away and the error code should disappear.

Error Code That is Related to the Dryer Door

DC, dE, dF, d0, 1 DC, 1DF – all of these codes indicate that the problem is with the dryer door. They are displayed when the door is not properly closed, or the door latch is not properly locked.

driyer8

Make sure the door is properly closed and that no items are stuck in it. If it is, fix the problem and restart the dryer. Erroneous codes will not appear now.

If the dryer keeps giving out an error code after you clear the jammed items in the door, there’s probably a problem with the latch, it may even be broken. In this case, you’ll have to have it repaired.

Problems with Thermal Fuse

Codes tC, t5, tC, t0, tE, tE3, tC5, 1 tC, 1tC5 and similar indicate that there is a problem with the thermal fuse, they are used to monitor it.

This could be due to a clogged lint screen. Because the clogging makes air ventilation very poor, heat is trapped in the dryer and it cools much more slowly.

How to Solve the Temperature Sensor Problem

To solve this problem, you will only need to clean either the lint collection grid or the ventilation system, it just depends on which of these is clogged and needs cleaning.

To eliminate the problem, replace the lint filter or clean the vent.

Problems in the Heating System

The HC, N0, HC4 and 1 HC codes are warning you of an error in the heating system or blocked dryer vent. This usually occurs because the pile grid is clogged.

As in the previous case, you will need to carry out a cleaning of the lint grid or ventilation filters and restart the dryer.

Because lint screen clogs cause heat to be trapped in the dryer, the heating system does not have time to cool down because the cold air supply is not available due to clogged filters.

Reset Button on a Samsung Dryer

If you want to reset your Samsung dryer but don’t know where the reset button is, then keep reading.

Unfortunately, many Samsung dryers don’t have a reset button, and even if they do, it’s hard to find. If your dryer does have such a button, however, performing a reset will be very easy and quick.

To reset your dryer with a special button, press and hold it for a while, and the gauges on the panel should blink.

But you have to remember that if you have a problem with the thermal fuse or if the dryer belt is damaged or broken, for example, constantly resetting will simply be a useless action and will not help to solve the problem.

Other questions

Read more: How do I reset my Samsung dryer timer? How to get rid of the knocking sounds inside the dryer? How to reset the Samsung dehumidifier filter check?

How do I reset the child lock on my Samsung dryer? How do I reset the Samsung dryer thermostat? How do I turn off my Samsung dryer if it won’t turn off?

You can find out the answers to these and other questions by reading our article to the end. We’ll give you some really good tips for your dryer, and you won’t have any problems with it.

How to Reset a Samsung dryer that cannot be turned off. This operation can be done by unplugging the machine, that is, turning off the main power.

It is advisable to leave it alone for 10-15 minutes after disconnecting the electricity so that the device can dissipate and the settings can be reset completely.

So, Why you Should Reset the Dryer

Samsung dryer tumbles sometimes require a forced reset, but why does it happen. As mentioned earlier, a reset may be necessary if there is a problem with the electronics or the power supply.

driyer9

It can also be due to the inability to select settings for certain functions when you use your mobile device.

The resetting process may take up to 5 minutes of your time at most. This can also be performed using your mobile phone.

What to Do if the Dryer Bangs Very Loudly

If you are experiencing a problem with a high volume banging noise from your dryer, chances are you are standing on an uneven surface.

Since most dryers come with adjustable feet, you can adjust them to fit any features of your flooring to avoid making loud noises during the drying process.

But that’s not the only reason for loud noises during operation, a loose exhaust vent that bangs during the drying process can also be the cause.

Another cause could be items that have fallen off the clothes or have been in the pockets. Items such as buttons, pebbles, locks, and so on that are forgotten in the dryer drum can make very loud unpleasant noises.

So check your clothes for such items that may fall off before washing and before putting them in the dryer.

Problems with the Dryer Belt

The drive belt is the part that is responsible for the rotation of the drum, and if it is broken or damaged, the dryer can make a loud knocking noise.

In order to eliminate the unwanted noise and improve the performance of your electric clothes dryer, you simply need to replace the drive belt, which is available almost everywhere.

The dryer can report the problem itself by displaying different codes with this or that value on the dryer’s display.

Video: How to Reset Samsung Dryer

In this video, step-by-step instructions how to reset a Samsung dryer model # DVE45R6100W but the instructions in the video apply to many different styles and models of Samsung dryers.

Final Thoughts

Well, hopefully, you were able to find a better solution and way to reset your dryer. After all, if your dryer does require rebooting, these are very good methods.

But you have to remember that not all problems can be solved by resetting because if your dryer has a broken part, a damaged belt, stuck buttons, or a faulty door, of course resetting in such cases will be absolutely useless action.

The resetting procedure does not imply anything super complicated and it can be done in just a couple of minutes.

After reading this article, you learned about the frequent errors on the dryer display, the different ways of resetting it, as well as the causes of unwanted noise in the dryer drum, and methods of eliminating it.

We hope we were able to help you and now your dryer is working and drying your clothes perfectly again. Here is how to remove paint from porcelain tub.